|
Sulfanol
WDLF
Sulfanol
WDLF is a low foam high performance
detergent for cotton,synthetics
and blended fabrics in high
turbulent machines.It is also
used effectively on continuous
processing systems.
Your
advantage
§
Concentrated product
§ Good emulsification property
.
§ High Detergency action
.
§ Very good wetting property
.
Features
§
Sulfanol WDLF is ideally suited
for scour bleaching of garments
before dyeing due
to its low foaming nature
§ Sulfanol WDLF has stability
over a wide range of pH that
ensures versatile
application in scouring ,demineralization
,desizing,scouring and bleaching
.
§ Sulfanol WDLF does not
need Defoamer/antifoaming agents
that are temperature
sensitive and which can disintegrate
under high shear conditions.
| Typical
Properties |
| Type |
Non-ionic
|
| Appearance |
Colourless
to pale yellow liquid |
| Composition
|
Synergistic
blend of fatty alcohol Ethoxylates. |
| Solubility |
Miscible
with water in all concentration
. |
| Compatibility |
Stable
over a wide range of pH
and stable to hard water
and bleaching chemicals.
|
Storage
Store
in a cool dry place. Stable
under normal conditions.
Health
and Safety
Health
and handling advice on these
products is given in individual
data sheets, available upon
request.
Application
1. Cold pad batch desizing
For desizing by cold pad
batch method for woven cotton
and PES cotton blends |
| Sulfanol
WDLF |
2-3g/l |
| Sulfazyme
A5X |
2-3g/l
is padded at R.T with 90-100%
pick up and batched for
12hrs or overnight and washed
at boil. |
2.Hot pad-steam desizing
In hot pad –steam desizing
method |
| Sulfanol
WDLF |
2-3g/l
|
| Sulfazyme
A5X |
2-3 g/l
is padded at 800C with 90-100%
|
| Expression
and steamed at 1000C for
20 minutes followed by washing
at boil. |
3. Hot pad-batch desizing
In hot pad –batch desizing
method |
| Sulfanol
WDLF |
1-2g/l
|
| Sulfazyme
A5X |
5-10g/l
is padded at 70-800C with
90-100% expression and batched
for 12hrs or overnight on
roll with polythene covering
and washed at boil. |
4.Processing
of of PES& blends
For batch processing of
PES & its blends |
| Sulfanol
WDLF |
0.5-1.0g/l |
| Soda ash
|
5.0g/l |
| Sodium
per borate 2.0g/l at 950C
for 15 min with 1:10 MLR
. |
5.Combined scour bleaching
For processing of cotton
hosiery or terry towel on
winch or soft – flow machines
|
| Sulfanol
WDLF |
0.5-1.0
g/l |
| Caustic
soda Flakes |
2.0-3.0
g/l |
| Sulfaxil
HTS |
0.5-0.6
g/l |
| Sulfaxil
OS |
6-7 g/l |
| Hy Peroxide
50% |
2.5 –3.0g/l |
|
Sulfaxil LUBE 0.5-0.6g/l
at 950C for 30 minutes with
MLR 1:10 |
6 Continuous processing
|
| Sulfanol
WDLF |
2-4
g/l |
| Caustic
soda Flakes |
8-10g/l
g/l |
| Sulfaxil
OS |
5 -6 g/l |
| Hy
Peroxide 50% 25-30 g/l steamed
at 1000C for 20 min followed
by washing off at boil. |
Technical
enquiries should be addressed
to:
Sulfast
Chemical Industries
1st Floor, 254 – B, Nirlon House,
Dr.A.B.Road, Nirlon House,
Mumbai 400 030
Tel : 91 22 4049 7700 Fax: 91
22 4049 7701 e-mail - sales@sulfast.com
Website : www.sulfast.com
SulfanolTM, SulfaxilTM and SulfanineTM
are registered trademarks of
Sulfast Chemical Industries.
The information and recommendation
in this publication are to the
best of our knowledge, information
and belief accurate at the date
of publication. Nothing herein
is to be constituted as a warranty,
express or otherwise. In all
cases, it is the responsibility
of the user to determine the
applicability of such information
or suitability of any product
for their own particular use.
All sales of these products
shall be subjected to Sulfast
Chemical Industries standard
condition of sale Revision 0
01/05
|
