|
Sulfanol
WDET
Sulfanol
WDET is a high performance auxiliary
with excellent wetting action
in addition to detergency.It
is very effective in removal
of oily and waxy impurities
from the fabric.
Your advantage
§ Concentrated product
§ Scouring agent for all
substrates.
§ High Detergency action
.
§ Very good wetting property
.
Features
§ Sulfanol WDET has good
compatibility with enzymes and
hence can be used in
desizing baths.
§ Sulfanol WDET has excellent
scouring ,wetting and dispersing
power to remove
soil & fats from the substrate.
§ Sulfanol WDET is also
best suited for garment processing
.
| Typical
Properties |
| Type |
Crypto-anionic
|
| Appearance |
Colourless
to yellow gel |
| Composition
|
Synergistic
blend of fatty alcohol Ethoxylates. |
| Solubility |
Dilutable
with water in all proportions |
| Compatibility |
Stable
over a wide range of pH
and stable to hard water
and bleaching chemicals.
|
Storage
Store in a cool dry place. Stable
under normal conditions.
Health
and Safety
Health and handling advice on
these products is given in individual
data sheets, available upon
request.
Application
1.Combined
scour bleaching
0.5-1.5g/l Sulfanol WDET is
used in combined scour bleaching
of garments before dyeing.
2.Pad batch desizing
For pad batch desizing |
| Sulfanol
WDET |
1-2
g/l |
| Sulfazyme
A5X |
2-3 g/l
is padded at 70-800C with
90-100% expression and batched
for 12 hrs on roll with
polythene covers. |
3.Hot pad-steam desizing
In pad –steam process |
| Sulfanol
WDET |
2-3g/l |
| Sulfazyme
A5X |
2-3 g/l
is padded at 800C with 90-100%
expression and steamed at
1000C for 20minutes followed
by washing . |
| 4.
Cold bleaching In cold bleaching
on jigger |
| Sulfanol
WDET |
4-6 g/l |
| Caustic
soda Flakes |
10-12g/l |
| Sulfaxil
OS |
6-7g/l |
| Hy Peroxide
50% |
30-35g/l
is recommended for achieving
good whiteness and absorbency
. |
5 Bleaching on soft flow
For batch processing in
soft flow machines |
| Sulfanol
WDET |
0.5-1.0
g/l |
| Caustic
soda Flakes |
3.0-4.0
g/l |
| Sulfaxil
OS |
0.5-1.0
g/l |
| Hy Peroxide
50% |
2.5-3.0
g/l at 980C for 45 minutes
at 1:10 MLR . |
6.Processing of PES. For
processing of PES &
its Blends |
| Sulfanol
WDET |
0.5-1.0
g/l |
| Caustic
soda Flakes |
1.5-2.0
g/l |
| at 900C
for 30 minutes at 1:10 MLR
. |
|
Technical enquiries should be
addressed to:
Sulfast
Chemical Industries
1st Floor, Nirlon House,
Dr. Annie Besant Road, Worli,
Mumbai 400 030
Tel : 91 22 4049 7700 Fax: 91
22 4049 7701 e-mail - sales@sulfast.com
website – www.sulfast.com
SulfanolTM,
SulfaxilTM and SulfanineTM are
registered trademarks of Sulfast
Chemical Industries.
The information
and recommendation in this publication
are to the best of our knowledge,
information and belief accurate
at the date of publication.
Nothing herein is to be constituted
as a warranty, express or otherwise.
In all cases, it is the responsibility
of the user to determine the
applicability of such information
or suitability of any product
for their own particular use.
All sales of these products
shall be subjected to Sulfast
Chemical Industries standard
condition of sale
|
