Sulfanol
NIW Liquid
An excellent
non-ionic wetting cum scouring agent.
Your
Advantage
§ Very good wetting properties.
§ Ensures uniform wetting of piece
goods and enables the pad liquor to
penetrate the fabric in the shortest
possible time
§ Promotes uniform pick up of the
treatment liquor
§ Good stability to acid, alkali
and electrolytes
Features
§ Compatible with wide range of
auxiliaries and enzymes.
§ Ideally suited for use in desizing
liquor along with amylase enzymes.
§ Stable over a wide range of pH,
which facilitates versatile application
in demineralization, desizing, scouring
and bleaching.
Typical
Properties
§ Type : :--> Non-ionic
§ Appearance ::--> Colourless
to pale yellow liquid
§ Composition ::--> Ethylene
oxide condensation product.
§ Miscibility : :--> Miscible
with water in all proportion.
§ Compatibility: :--> Stable
over a wide range of pH and stable to
hard water and bleaching chemicals.
| Typical
Properties |
| Type |
Non
-ionic |
| Appearance |
Colourless to
pale yellow liquid |
| Composition
|
Ethylene oxide
condensation product. |
| Miscibility |
Miscible with water
in all proportion. |
| Compatibility |
Stable over a wide
range of pH and stable to hard water
and bleaching chemicals. |
Storage
Store in a cool dry place. Stable under
normal conditions.
Health
and Safety
Health and handling advice on these
products is given in individual data
sheets, available upon request.
Application:
| PREWETTING |
| Sulfanol
NIW Liquid |
0.5-2.0
g/lit |
Machine: JIGGER
Enzymatic desizing |
|
| Sulfanol
NIW liquid |
0.5 – 2.0 gm/lit |
| Sulfazyme A5X liquid |
0.7 – 1.5 % (owf)
|
| Common salt |
10 – 15 gm/lit |
| Treat
at 60 – 80°C by adjusting pH
to 6.0 to 7.0 for 30-60 min. |
Scouring of cotton |
|
| Sulfanol
NIW liquid |
0.5-2.0 gm/lit |
| Caustic soda flake |
1.5-2.0 % |
| Sulfaxil LTS-N
liquid |
0.5-1.0 % |
| Treat at 90 - 95°C
for 1-2 hours |
|
Scouring of Wool |
|
| Sulfanol
NIW liquid |
1.0-2.0 gm/lit |
| Soda ash |
1.0-2.0 gm/lit |
| Treat at 55-600C
for 30-45 mins |
|
Bleaching
A) READY TO DYE
|
|
| Caustic soda flakes |
2.5-3.0 % |
| H2O2 (50%) |
2.0 - 3.0 % |
| Sulfaxil OS liquid
|
1/4th of H2O2 used |
| Sulfaxil LTS-N
liquid |
0.3-0.5 % |
| Sulfanol NIW liquid |
0.5-2.0 gm/lit |
| Treat at 95°C
for 1-2 hours |
|
B) Full white
Hypochlorite bleach |
|
| Available Chlorine |
1.0-3.0 gm/lit |
| Sulfanol
NIW liquid |
0.5-1.0 gm/lit |
| Treat
at Room Temperature for 30 – 60
min |
Peroxide bleaching |
|
| Sulfanol
NIW liquid |
1.0-2.0 gm/lit |
| Caustic soda flakes |
2.0-3.0 % |
| H2O2 (50%) |
3.0-6.0 % |
| Sulfaxil OS liquid
|
0.5-1.5 % |
| Sulfaxil LTS-N
liquid |
0.2-0.5 % |
| Treat at 95°C
for 60-90 mins |
|
C)One bath scour-bleach (discontinuous) |
| Sulfanol
NIW liquid |
1.0-2.0 gm/lit |
| Caustic soda flakes |
2.0-3.0 % |
| H2O2 (50%) |
3.0-4.0 % |
| Sulfaxil OS liquid
|
1/4th of H2O2 |
| Sulfaxil LTS-N
liquid |
0.5-1.0 % |
| Treat at 95°C
for 60-90 mins |
|
Technical
enquiries should be addressed to
Sulfast Chemical
Industries
254-B, 1st floor, Nirlon House
Dr.Annie Besant Road, Worli
Mumbai 400 030
Tel: 91 22 4049 7700 Fax: 91 22 4049
7701 e-mail - sales@sulfast.com website
– www.sulfast.com
SulfanolTM,
SulfaxilTM and SulfanineTM are registered
trademarks of Sulfast Chemical Industries.
The information and recommendation in
this publication are to the best of
our knowledge, information and belief
accurate at the date of publication.
Nothing herein is to be constituted
as a warranty, express or otherwise.
In all cases, it is the responsibility
of the user to determine the applicability
of such information or suitability of
any product for their own particular
use. All sales of these products shall
be subjected to Sulfast Chemical Industries
standard condition of sale.
Revision 1 08/07
|
