|
Sulfanine
NIS Flakes
Sulfanine
NIS flakes is a 100% active,
concentrated non-ionic softener,
which imparts silky non –greasy
handle to natural and synthetic
fabrics with non-yellowing properties.
Your
advantage
§
Durable soft handle.
§ No Yellowing and shade
change.
§ Compatible with resins
and silicones
§ Suitable for white goods
Features
§
Sulfanine NIS flakes does not
react with Optical brightening
agents.
§ Sulfanine NIS flakes
give a good softness and feel
to ready made goods when
applied after dyeing.
| Typical
Properties |
| Type |
Non
-ionic |
| Appearance |
Near White
flakes. |
| Composition
|
Condensation
Product. |
| Compatibility |
Stable
to hard water and compatible
with dilute acids, anionic
products and all types of
finishing agents. |
| Product
Dilution |
To prepare
a 20% solution of the product
for easy usage add 20kg
of Sulfanine NIS Flakes
to 80 lire of warm water
under stirring till a homogenous
paste is formed. |
Storage
Store
in a cool dry place. Stable
under normal conditions.
Health
and Safety
Health
and handling advice on these
products is given in individual
data sheets, available
upon request.
Application
1.By exhaust process
For exhaust application 3-4%
owf of diluted Sulfanine
NIS Flakes is to be
used at 45-50°C for 30min
followed by hydro extract and
drying at 110-120ºC .
2.By padding process.
For pad application 20-40g/l
of diluted Sulfanine
NIS Flakes is padded
at 40ºC with 80% pick up
and then dried at 110-120ºC.
The concentration may vary depending
upon the softness required and
the substrate.
3.Garment
Processing
For finishing of dyed garments
3-4% owf of diluted Sulfanine
NIS Flakes is
applied at 50-60ºC for
30min and hydro extracted.
Technical
enquiries should be addressed
to:
Sulfast Chemical Industries
1st Floor, Nirlon House,
Dr. Annie Besant Road, Worli,
Mumbai 400 030
Tel : 91 22 4049 7700 Fax: 91
22 4049 7701 e-mail - sales@sulfast.com
Website : www.sulfast.com
SulfanolTM,
SulfaxilTM and SulfanineTM are
registered trademarks of Sulfast
Chemical Industries.
The information and recommendation
in this publication are to the
best of our knowledge, information
and belief accurate at the date
of publication. Nothing herein
is to be constituted as a warranty,
express or otherwise. In all
cases, it is the responsibility
of the user to determine the
applicability of such information
or suitability of any product
for their own particular use.
All sales of these products
shall be subjected to Sulfast
Chemical Industries standard
condition of sale Revision 1
08/07
|
