|
Sulfanine
MAS Liquid
Sulfanine MAS liq. is micro
amino silicone emulsion, which
gives silky soft feel with
bulkiness to the fabric.
Your
advantage
§
Gives excellent surface softness
and bulkiness to woven and
knit fabric.
§ Improves sew ability
of knitted fabric.
§ Improves wash and wear
properties and crease recovery
angle.
§ Improves tear strength
and abrasion resistance.
§ Suitable for all type
of fabric.
Features
§
Sulfanine MAS liq. gives minimum
yellowing to the fabric.
§ Sulfanine MAS liq.
can be applied by exhaust
and padding method.
§ Sulfanine MSA liq.
is compatible with all type
of chemicals.
§ Sulfanine MAS liq.
gives permanent softness to
the fabric.
§ Sulfanine MAS liq.
does not react with optical
brightening agent.
§ Sulfanine MAS liq.
is stable in hard water and
wide range of pH.
| Typical
Properties |
| Type |
Non
-ionic |
| Appearance |
Clear
translucent colourless
liquid. |
| Composition
|
Amino
micro silicone emulsion. |
| Compatibility |
Stable
to hard water and compatible
with dilute acids, nonionic
and anionic products and
all types of finishing
agents |
| Product
|
Dilution
Easily diluted in cold
water. |
Storage
Store in a cool dry place.
Containter should be tightly
closed when not in used.
Health
and Safety
Health and handling advice
on these products is given
in individual data sheets,
available upon request.
Application
| 1.
By exhaust process |
| Sulfanine
MAS liq. |
0.5-2.0%
OWF |
| Sulfanine
CWS flakes (10%) |
1.0-2.0% |
| pH |
4.5-5.5
|
| Temperature |
Room
temperature |
| Time |
15-20
Minutes |
| MLR |
1:6-1:8 |
| Dry at |
100-1300C |
2. By padding method |
| Sulfanine
MAS liq. |
5-20 gpl |
| Sulfanine
NIP |
10-20
gpl |
| Pad
-Dry –Cure at 1500C |
Technical enquiries
should be addressed to:
Sulfast
Chemical Industries
1st Floor, 254 –B, Nirlon
House,
Dr. Annie Besant Road,
Worli Mumbai 400030
Tel : 91 22 4049 7700 Fax:
91 22 4049 7701 e-mail - sales@sulfast.com
website – www.sulfast.com
SulfanolTM,
SulfaxilTM and SulfanineTM
are registered trademarks
of Sulfast Chemical Industries.
The
information and recommendation
in this publication are to
the best of our knowledge,
information and belief accurate
at the date of publication.
Nothing herein is to be constituted
as a warranty, express or
otherwise. In all cases, it
is the responsibility of the
user to determine the applicability
of such information or suitability
of any product for their own
particular use. All sales
of these products shall be
subjected to Sulfast Chemical
Industries standard condition
of sale
Revision 1 08/07
|
