| Sulfaxil
G AcidLiquid
Sulfaxil
G ACID liq. is an acid buffer
for dyeing that replaces acetic
acid. Additionally it is an
effective core alkali neutralizer.
Ensures complete removal of
residual alkali from core of
cotton and polyester fabric.
Your
Advantage
·
Assures consistent result in
polyester dyeing.
·
Ensures complete neutralisation
of alkali after pretreatment
of cotton.
·
Maintain the pH of dyeing bath
throughout the process because
of its non- volatile nature.
·
Suitable for all types of dyeing
where acidic pH control is needed.
Features
· Does not contain any
mineral acid which cause to
degrades substrate especially
cellulosics.
· Non-volatile in nature.
· Required lesser dosage
than acetic acid.
· Stable to hard water.
| Typical
Properties |
| Type |
nonionic |
| Appearance |
Clear
to pale yellow liquid. |
|
Constitution |
Blend
of organic acid |
| Solubility |
Miscible
with water in all proportion.
|
| Compatibility |
With
all type of products
|
Storage
Store in a cool dry place. Stable
under normal conditions.
Health
and Safety
Health and handling advice on
these products is given in individual
data sheets, available upon
request.
Application
|
Disperse Dyeing:
|
| Sulfaxil
G ACID liq. |
0.5-1.0 gpl |
| Run
at 1300C for 45-60 mins |
|
| Core
Alkali Neutralisation: |
|
| Sulfaxil
G ACID liq |
1.0-2.0
gpl |
| Treat
at Room Temperature for
10-15 mins |
|
| Neutralisation
done after scouring and
bleaching treatment |
| Acid
Dyeing on Nylon and Wool: |
|
| Sulfaxil
G ACID liq. |
0.5- 1.0
gpl |
| Run
at 90-950C for 45-60 mins |
|
| Neutralisation
of reactive dyed goods: |
|
| Sulfaxil
G ACID liq |
0.5- 1.0
gpl |
Neutralised
at Room Temperature for
10-15 mins
Neutralisation is done after
hot wash |
Technical
enquiries should be addressed
to:
Sulfast Chemical Industries
1st Floor, 254 – B, Nirlon House,
Dr.A.B.Road, Nirlon House,
Mumbai 400 030
Tel : 91 22 4049 7700 Fax: 91
22 4049 7701 e-mail - sales@sulfast.com
Website – www.sulfast.com
SulfanolTM, SulfaxilTM and SulfanineTM
are registered trademarks of
Sulfast Chemical Industries.
The
information and recommendation
in this publication are to the
best of our knowledge, information
and belief accurate at the date
of publication. Nothing herein
is to be constituted as a warranty,
express or otherwise. In all
cases, it is the responsibility
of the user to determine the
applicability of such information
or suitability of any product
for their own particular use.
All sales of these products
shall be subjected to Sulfast
Chemical Industries standard
condition of sale. Revision
1 08/07
|
