Sulfanol
NSIL is a high performance non-silicone
defoamer for processing of goods
in various machines like HT/HP
, jet , package dyeing machine,
close winches with nozzles and
other high turbulent machines.
Your
advantage
§ No unwanted
spots on the fabric.
§ Good deaerating property.
§ Compatible with all chemicals.
Features
§ Sulfanol NSIL
can control excessive foaming
in scouring and bleaching
stages in garment processing
.
§ Sulfanol NSIL is stable
to electrolytes.
§ Sulfanol NSIL controls
foam at a very low dosage level.
| Typical
Properties |
| Type |
Nonionic. |
| Appearance |
Milky
white free flowing emulsion.
|
| Composition |
Based on
hydrocarbons. |
| Solubility |
Readily
dispersible in water at
room temperature. |
Storage
Store in a cool dry
place. Stable under normal conditions.
Health
and Safety
Health and handling
advice on these products is
given in individual data sheets,
available upon request.
Application
1.Preparation
of Solution
Sulfanol NSIL
is diluted with cold water with
good agitation and
prepared on a daily basis and
diluted material should be used
within 24 hrs for best results.
2.Garment
processing
0.01-0.5g/l Sulfanol
NSIL can effectively
control unwanted foaming
in garment dyeing.
3.Fabric
processing
0.1-0.2 g/l Sulfanol
NSIL have been found
effective in scouring
and bleaching baths.
4.Polyester dyeing
0.1-0.2g/l Sulfanol NSIL is
used in disperse dye bath to
ensure
adequate foam control
5.Fabric
printing
0.5-1.0g/l Sulfanol NSIL is
added to print paste to avoid
unwanted
foaming during printing .
Technical
enquiries should be addressed
to:
Sulfast
Chemical Industries
1st Floor, 254 – B, Nirlon House,
Dr.A.B.Road, Nirlon House,
Mumbai 400 030
Tel : 91 22 4049 7700 Fax: 91
22 4049 7701 e-mail - sales@sulfast.com
website – www.sulfast.com
SulfanolTM,
SulfaxilTM and SulfanineTM are
registered trademarks of Sulfast
Chemical Industries.
The
information and recommendation
in this publication are to the
best of our knowledge, information
and belief accurate at the date
of publication. Nothing herein
is to be constituted as a warranty,
express or otherwise. In all
cases, it is the responsibility
of the user to determine the
applicability of such information
or suitability of any product
for their own particular use.
All sales of these products
shall be subjected to Sulfast
Chemical Industries standard
condition of sale
|
